Inflato-Ray Technology - Operational Manual
Introduction
Inflato-Ray Technology is a revolutionary new way to inflate objects with the power of pure awesomeness. This manual will guide you through the basics of operating an Inflato-Ray device.
Warning: Do not use Inflato-Ray Technology near open flames or in close proximity to sanity.
Pre-Operational Checklist
- Ensure you are wearing your favorite lab coat and safety goggles.
- Make sure the area around you is clear of any breakable or flammable objects.
- Double-check that you have a fire extinguisher nearby, just in case things get out of hand.
Operating the Inflato-Ray
- Turn the dial to "Inflate" and hold for at least 5 seconds.
- Adjust the pressure settings to the desired level of awesomeness.
- Stand back and admire your handiwork!
Troubleshooting
- If the object you're inflating starts to get out of control, refer to section 3.3: "What to Do When the Inflato-Ray Gets Away" for further instructions.
For further guidance on advanced Inflato-Ray techniques, visit our Advanced Operating Techniques page.
For a list of authorized Inflato-Ray repair services, visit our Authorized Repair Services page.
Remember, with great power comes great responsibility. Use Inflato-Ray Technology wisely.