Emergency Procedures for the Robot Room

Section 1: Initial Response

When a robot in the room exhibits erratic behavior, follow these steps:

1. Call the Robot Control Center at RCC to report the incident.
2. Evacuate all nearby humans to a safe distance from the malfunctioning robot.
3. Do not attempt to repair the robot yourself. This will only result in further damage and/or robot-induced trauma.

Section 2: Advanced Procedures

For more severe cases, refer to the following advanced procedures:

1. Perform a system reboot by pressing the reboot button located on the robot's back panel.
2. Run a diagnostic scan using the Robot Diagnostic Kit.
3. In extreme cases, call in a Robot Recovery Team for further assistance.

For additional information on robot safety procedures, refer to the Robot Safety Brochure.