Table of Contents
Technical Specs
Printer Settings
| Setting |
Value |
Notes |
| Layer Height |
0.2mm |
Minimum recommended for optimal results |
| Infill Density |
20% |
Optimal balance between print time and strength |
| Speed |
50mm/s |
Recommended for best print quality |
Slicing Settings
| Setting |
Value |
Notes |
| Cylinder Infill Density |
30% |
Optimal for printing hollow objects |
| Slicing Angle |
30 degrees |
Recommended for best surface finish |
| Skirt Height |
0.5mm |
Prevents warping during print |
Notes
These settings are subject to change without notice. Consult the design files for more information.